The 3D printed house is on the horizon

The house is part of a wave of 3D printing houses that are increasingly popular.

And, while it’s not clear yet how many 3D printers will actually make their way into homes in the near future, the idea of making a house of glass, wood, and metal that looks like a real house is a tantalizing prospect for many homeowners.

The Hill House is a 3D printer that, when built, will be able to print a 2.4-meter tall, 3-foot-wide, 1.6-meter long, and 1.4 meters wide wooden house that sits atop a hill.

The building itself is powered by a single 110V, 120V, and 220V DC motor, and the walls of the house have been constructed of solid wood.

The house’s interior will be made of a single layer of solid carbon fiber.

The main structural components are a 2-story steel frame with two stories of windows and a single-story metal roof that rises above the house.

The walls of each floor will have a 3-inch-thick layer of glass fiber to support the walls, while a second layer of fiber provides a window ledge that will be used for ventilation.

This second layer will have two openings to provide ventilation, a small shower area, and a laundry room.

There are four bedrooms and three bathrooms on the inside of the home, and there will be an exterior deck and a deck of windows that open onto the street below.

The whole design, like many other 3D-printed homes, will need to be 3D scanned to create a print.

As the Hill House was designed, the design team put a lot of thought into how to print the entire house in one go.

In addition to the main frame, which will consist of two steel sheets, there will also be four sections of wood that will form a wall, four sections that will have four windows, and four windows that will open onto a roof.

The outermost two walls will have one window that will lead to the roof.

All of the windows will be one-story and will be painted a dark brown or white.

The interior of the Hill house will be designed around two different wood types.

The first wood will be a dense-but-sturdy wood that’s used to make furniture.

The second wood will come from a different kind of wood, which is used to build wood beams for the roof, which also will be built on the underside of the frame.

The total build will take about eight weeks.

As a house will cost about $150,000, the Hill Houses will be much more affordable than other home 3D print houses, especially in terms of cost of materials and the cost of the materials themselves.

While 3D prints are becoming more and more popular, many homeowners are reluctant to pay for the technology because they see 3D designs as “too expensive.”

While this may seem like an unrealistic amount of money, many people believe that the materials needed to build a 3d-printed home will be cheap to make and therefore not as desirable as a traditional home build.

3D Printing is expected to be cheaper in the future, and with 3D houses becoming more affordable and available for everyone to afford, there’s a good chance that the technology will be on the rise again.

For the designers behind the Hill houses, the biggest advantage of 3d printing over traditional home construction is the ability to make any piece of furniture in the house from any material.

They say that they are able to create anything from a coffee table to a coffee grinder, and 3D models are just as flexible as a model.

“The fact that 3D has such a wide range of applications means that a lot more people can use it,” said the design director, Matthew DeFoe.

The 3d printed Hill House, a home built by 3D Printed House, will open in 2019.

Follow the author @felipe_mexico